To emphasize on safety awareness towards workplace hazards which arise from the use of forklift in accordance with the legal safety requirements under OSHA 1994 (Act 514) standard. To train and reveal the important issues that involves truck driving such as machines and technical knowledge, handling skills and the correct operational attitudes.

1. Photo Kaki
2. Forklift Training Materials
3. Forklift Training Video

Mach 1 Equipment Group Malaysia is an established brand in providing forklift rental services and specialized in forklift repair. Forklift Operator Training Indepth program on the safe operation of forklifts. 46 slides: Forklift Safety Driving a forklift is a serious responsibility. It is generally more difficult than driving a car. 22 slides: Forklift Safety Forklift tips over because the rated load capacity is exceeded, or the load is handled improperly.

Need a highly-accepted Forklift Operator Certificate Today? Sign up and get your Certificate in a few hours with our easy-to-use and fully compliant OnlineForklift Operator Certification Training. Re-certifications can take as little as 1 hour!

Certificate Acceptance Guarantee

Enjoy the peace of mind that comes with ZERO risk. Our Forklift Operator Certification Training has been designed in alignment with OSHA 29 CFR 1910.178, ANSI B56.1, and the CSA B335-15 Safety Standard for Lift Trucks. That means that the course is modern, up to date, compliant, and will be universally recognized by employers who strive to meet OSHA’s requirements. If our certificate is not accepted by your employer, we’ll provide you with a full refund.

Our online forklift certification training has been designed in alignment with OSHA 29 CFR 1910.178, ANSI B56.1, and the CSA B335-15 Safety Standard for Lift Trucks. That means that the course is modern, up to date, compliant, and will be universally recognized by employers with the most stringent operator qualification standards. If our certificate is not accepted in any of the following states, we’ll give you a full refund for the training.

• Alaska

• Arkansas

• Colorado

• Deleware

• Georgia

• Idaho

• Iowa

• Arkansas

• Louisiana

• Maryland

• Michigan

• Mississippi

• Nebraska

• New Hampshire

• New Mexico

• North Carolina

• Ohio

• Oregon

• South Carolina

• Tennessee

• Utah

• Virginia

• West Virginia

• Wyoming

The Occupational Safety and health Administration (OSHA), The American National Standards Institute (ANSI), and the Canadian Standards Association (CSA) each have a standard that outlines many guidelines and recommendations relating to forklifts/lift trucks. Among these are very specific requirements relating to forklift operator training.

Our Forklift Certification Training has been carefully designed to meet and even exceed the training requirements that have been outlined in each of these standards.

Because employers are required to comply with these standards (OSHA and ANSI in the USA, and CSA in Canada), training and certifications that have been aligned with them will be seen as more valuable than those that have not been.

Practical Training Component

It’s important to note that in order to completely satisfy the requirements of the standards, workplace and equipment specific training must be completed by the employer, along with a practical evaluation. These workplace training components cannot be completed by any third party provider whether they offer online or live training. The reason for this is that each workplace is different and poses unique hazards. An employer is best suited to train workers on these unique circumstances that exist within their workplace and their specific equipment.

Fast

Online Forklift Training can be completed faster and more efficiently than traditional training methods. Get your Forklift Operator Certificate in 1 – 4 hours.

Affordable

Our Online Forklift Operator Training is FREE. You only pay for the certificate if you’re satisfied and AFTER you take the training.

Convenient

Learn at your own pace from anywhere on the planet where there’s a computer, laptop, or mobile device and a high-speed Internet connection.

Compliant

Our online forklift certification training has been designed in alignment with OSHA and ANSI Safety Standard for Forklifts.

Unlimited Quiz Attempts

Unlimited course and quiz retakes are included at no additional cost. No need to worry if you don’t happen to pass the course on your first attempt.

Satisfaction Guarantee

Our training exceeds legislative standards. If our certificate is not accepted by your employer, we’ll give you a full refund for the certificate.

Sign Up Now for free to take the OSHA Standards-Compliant Forklift Operator online training program. Once you complete the training course, you’ll be given the option to purchase your official certificate that can be viewed and printed immediately.

Management information systems can be designed to perform a specific function, such as order processing, or can be built around multiple sub-systems that cover most business functions. The key to building effective management information systems is to understand how a business operates and establish a system that enhances the usability of data and streamlines business processes. Jan 16, 2017  Your building management system allows you to monitor and control each electrical and mechanical component in your operation, and is built in compliance with building requirements and government regulations. Your system provides green technology for energy conservation and environmental sustainability. Build your own ACIS™ What is a Building Management System? Building Energy Management. Save energy, save money; ACIS™ Building Energy Management System; BMS Energy Upgrades; Energy Savings Opportunity Scheme (ESOS) Controls Solutions. Green Data Centres; Retail Air Conditioning Controls; Chilled Water Systems; Case Studies & Testimonials. Build your own building management system pdf.

Online Forklift Operator Certification

New Operators Classes 1,2,4,5,7
A dynamic, OSHA-Compliant Forklift Operator Certification Training Online Course.

Online Forklift Operator Re-Certification

Experienced Operators Classes 1,2,4,5,7
An OSHA-Compliant Forklift Certification Refresher Online Training Program (1 – 2 Hours).

Online HAZCOM Certification Training

All Workers
A dynamic, 60-Minute OSHA-Compliant HAZCOM Certification Training Course for all workplaces.

Our interactive Online Forklift Certification Training provides operators with comprehensive knowledge and decision-making skills that ultimately results in improved safety and productivity while operating various types of mobile equipment. The course is comprised of several elements including five (5) learning modules that conclude with a knowledge assessment (quiz).

Introduction and Overview

During the introduction and overview module, students learn about the course functionality as well as the requirements to competently progress through the lessons. The remainder of the module focuses on topics that introduce workers to Forklift, the legislation, training requirements, and factors that contribute to incidents.

• Lift truck overview
• Lift Truck incidents and contributing factors
• Standards and legislation
• Training and physical requirements

Equipment Types, Anatomy & Components

Module 2 will introduce learners to the various types of Forklifts as well as their most common features and components. The module will conclude with learners becoming familiarized with required Forklift maintenance and inspection principals.

• Types of Forklifts and classification
• Component identification
• Features and attachments
• Pre-operational inspections

Stability and Capacity

Module 3 covers the cornerstone of forklift safety; stability and capacity. Throughout the module, students learn about stability and capacity-related principals, factors that affect stability, and how to prevent stability-related incidents. The entire module puts focus on forklift tip over prevention since tip-overs are a leading cause of forklift-related fatalities.

• Stability
• The stability triangle and trapezoid
• Load center
• Nameplate and Capacity
• Factors that affect stability

General Operation & Safety

Module 4 cover general operation and safety principals. Students will learn how to select the correct forklift and attachments based on the tasks that they’re required to perform. They’ll also learn how to safely travel loaded and unloaded, how to safely handle various types of loads, and how to operate during unique scenarios, among other things.

• Truck and accessory selection
• Start-up
• Travelling
• Load selection, security, and integrity
• Load pick up, placement, stacking, and destacking
• Docks, trucks, shipping containers, and railcars
• Ramps, grades, and elevators
• Lifting, lowering and supporting personnel
• Shutdown procedures

Refueling / Recharging

In the final module of the Online Forklift Certification training course, students will learn about principals relating to safely refueling and recharging their equipment.

• Propane cylinder exchange
• Propane cylinder inspection
• Refueling other hydrocarbons
• Battery recharging and exchange

Wow! Great Forklift Course!

Wow, I was really impressed with this course. Very interactive and does a great job to prepare you for the module quizzes. I love how convenient the training is. I completed the whole thing on my iPad!

I Would Recommend this Training

The training course was easy to understand and I liked that I could complete it at home on my time. The quality was great, the information was clear and interactive activities, real-life scenarios were great.

I would recommend to take it to anyone who requires it for work opportunities.

Super Easy to Use and Follow

The Forklift Training Course was super easy to use and follow. Much better than expected. Keep up the great training modules!

High Quality and Easy to Use

Very helpful, easy to use, high quality, start to finish it was good. The training was better than expected and a lot easier to learn than I thought.

Very Informative and Interactive

I really enjoyed the interactive elements in each of the modules! Very informative and interactive which was more than I expected.

Very Convenient!

Very convenient! Better than I expected, easy to follow and intuitive. I will be signing up more employees.

Better Than Previous Courses

The format was really well done and presented from an educational perspective. It was better than previous courses in that I could work at my own pace.

Yes, this online forklift certification training course exceeds the knowledge component training requirements as set forth by OSHA, ANSI and CSA forklift standards. Workplace and equipment specific training may also be required in order to satisfy operator competency requirements depending on whether or not you’re an experienced operator and have had training in the past. This portion of the training must be completed by your employer.

We do not send certificates in the mail. After completing the course, you’ll be given instant access to your certificate and wallet card in PDF format. You’ll be able to instantly view, download, and print the documents as required.

Yes, you can! Our Online Forklift Certification Training course has been optimized to work perfectly on mobile devices of all types. That includes android and apple tablets and smartphones

Because this course was developed to be extremely comprehensive and exceed OSHA, CSA and ANSI requirements, approximately two – four hours will be required in order to successfully complete the course. This can vary significantly due to several factors. The refresher version takes between 1 – 2 hours to complete.

You can start your online forklift training course immediately after signing up and making the purchase through our secure checkout form. The whole process literally takes only a few minutes.

As per the CSA requirements, Lift Truck Operators must be retrained at intervals no longer than every three years. Therefore, our Lift Truck Operator certificates expire three years after they’re awarded. Additionally, employers may be required to evaluate their lift truck operators under specific circumstances in accordance with their jurisdiction’s legislation.

Yes! We want you to be completely satisfied and we’re very confident that you will be. If for some reason you’re not satisfied, full refunds will be offered for up to 30 days after your purchase or until you complete your course and are issued a certificate.

How Forklift Certification Works:

With CertifyMe.net Online Forklift Certification, you can…

Certify forklift operators without leaving your facility.
Print your certificates and wallet cards TODAY!
Promote SAFETY in your organization
Stop worrying about OSHA citations.

Certify your forklift operators TODAY online.

It’s FAST and EASY! $59.95 per operator

AVOID OSHA CITATIONS:

OSHA can impose a $7,000 fine for each untrained operator (up to $70,000 fine for willful violations). Without proper OSHA forklift certification, employees and employers can be liable for significant fines. For workers without forklift training, one fine can literally wipe out a year’s worth of salary – and much more! Don’t put your workplace and your employees in jeopardy; get OSHA forklift certification today.

Satisfies . . .

Liability Insurance
Worker’s Comp
OSHA Field Inspectors

CONSIDER THIS:

Next year, 100,000 injuries involving forklifts will be reported. 100 workers will lose their lives.

OSHA’s regulatory reference:

Cal OSHA Title 8 Section 3668
OSHA Standard 29 CFR 1910.178

Benefits of using CertifyMe.net and in-house practical training:

Photo Kaki

Forklift Operator Training and Evaluation can be conducted when most convenient for the employer and the operators. Anytime and anywhere.
Outside forklift training and certification programs can cost hundreds to thousands of dollars depending on your location and number of people that must be certified.
Forklift operators never leave the jobsite, minimizing employee downtime and potential liability.
Everything you need for forklift operator training in one simple and easy to use package.
All curriculums offered in Spanish. Register NOW or contact us for special group discounts and multiple locations.

It’s mandatory that you train your forklift operators.

OSHA Regulations

OSHA ISSUES NEW REGULATIONS FOR FORKLIFT OPERATORS
December 1, 1998

Are You in Compliance? The Employer is Responsible for OSHA Compliance for all its Lift Truck Operators.
On December 1, 1998, the Occupational Safety and Health Administration (OSHA) published a standard that revised the existing requirements of 29 CFR 1910.178 and issued new requirements to improve the training of powered industrial truck operators.

Forklift Training Materials

The standard becomes effective on March 1, 1999 with mandatory compliance by December 1, 1999. This new standard is intended to reduce the number of injuries and deaths that occur as a result of inadequate operator training. The powered industrial truck operator training requirements will apply to all industries except agricultural operations.

1. The employer must evaluate the operators’ performance before allowing any employee to use a vehicle in the workplace, except for training purposes.
2. The employer may designate any qualified employee as Trainer/Evaluator. There are no special or additional “Train the Trainer” requirements.
3. OSHA does not certify, accredit or approve any trainers or training programs for powered industrial trucks. The responsibility for compliance with the requirements of the OSHA standard rests with the employer.

REQUIREMENTS OF THE NEW STANDARD

Who should conduct the training?

Persons with the necessary knowledge, training, and experience to train powered industrial truck operators and evaluate their competence must conduct all training and evaluation.

The OSHA rules state: “Training and evaluation shall be conducted by a person with the knowledge, training and experience to train powered industrial truck operators and evaluate their competence”. This means that any adequately proficient and experienced lift truck operator can become a forklift safety trainer for your company.

This means that OSHA forklift training doesn’t have to come from an expensive 3rd-party training provider, or that you have to spend countless hours and untold budget dollars toward training seminars and special workplace awareness sessions. Known as our “Train the Trainer” program, this specialized forklift training course allows your company to have an in-house expert on-hand, all the time! CertifyMe.net provides all essential forklift certification and forklift training, all at a great price. And best of all, our OSHA forklift certification can be completed at your employees’ convenience.

Outside qualified training organizations can provide evidence that the employee has successfully completed the relevant classroom and practical training. However, each employer must ensure that each powered industrial truck operator is competent to operate a truck safely, as demonstrated by the successful completion of the OSHA forklift training and evaluation.

OSHA forklift training requirements also provide an outline of the topics that must be included in the written, verbal, and practical training. CertifyMe.net has made sure that our affordable program includes all necessary components employees need to successfully and safely operate forklifts. We meet all OSHA requirements, while providing the content we know is both essential and most helpful to aspiring operators, completely accessible online and at your own pace. OSHA never states that operators need to attend an expensive training facility to learn all the essential topics of operating forklifts safely. We’ve made being OSHA-compliant as easy, convenient, and affordable as possible!

GENERAL TRAINING REQUIREMENTS

The new standard requires employers to develop and implement a training program based on the following general principles:

Safe truck operation
• Types of vehicle(s) being used in the workplace
• Hazards of the workplace created by the user of the vehicles
• General safety requirements of the OSHA standard
• The operator’s prior knowledge and skill in operating the vehicle
• The operator’s demonstrated ability to operate a vehicle safely

General requirements for training and evaluation are:
• Formal (lecture, video, interactive computer, etc.) training
• Practical training using demonstrations and exercises
• Employers must certify that each operator has received the training
• Employers must evaluate each operator’s performance at least once every three years

Prior to operating the truck in the workplace, the employer must evaluate the operator’s performance and determine the operator to be competent to operate a powered industrial truck safely. For employees hired before December 1, 1999, training and evaluation must be completed by that date. For employees hired after that date, training must occur before that person is allowed to operate a truck in the workplace.

Refresher training is needed whenever an operator demonstrates a deficiency in the safe operation of the truck, such as:

• The operator is involved in an accident or near-miss incident
• The operator has been observed using the vehicle in an unsafe manner
• An evaluation has determined the need for additional training
• There are workplace changes that can affect vehicle operation
• The operator is assigned to use a different kind of truck

Refresher training is also required at least every three years, even if the operator has not been found operating the forklift unsafely or been involved in an accident.

DEFINITION OF A POWERED INDUSTRIAL TRUCK

Any mobile power-propelled truck used to carry, push, pull, lift, stack or tier materials. Powered industrial trucks can be ridden, or controlled by a walking operator. Earth moving and over the road haulage trucks are not included in the definition. Equipment that was designed to move earth but has been modified to accept forks are also not included.

WHO MUST BE TRAINED?

All persons who will operate a powered industrial truck must be trained and pass an operator evaluation before being allowed to use a vehicle in the workplace.

OSHA states that an employer does not need to retrain an employee in the operation of a powered industrial truck if the employer certifies that the operator has been evaluated and has proven to be competent to operate the truck safely. However, the employer is fully responsible for documentation certifying that the required training and evaluation has taken place for all truck operators.

The operator would need additional training in those elements where his or her performance indicates the need for further training and for new types of equipment and areas of operation.

TEMPORARY EMPLOYEES

OSHA has issued several letters of interpretations on the subject of training of temporary employees. Basically, there is a shared responsibility for assuring employees are adequately trained. The responsibility for providing training should be spelled out in the contractual agreement between the two parties. The temporary agency or the contracting employer may conduct the training and evaluation of operators from a temporary agency as required by the standard; however, the host employer (or other employer who enters into a contract with the temporary agency) must provide site-specific information and training on the use of the particular types of trucks and workplace-related topics that are present in the workplace.

DOCUMENTATION REQUIREMENTS

The OSHA standard requires that the employer certify that each operator has received the training and has been evaluated. The written certification record must include the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the training or evaluation.

Employers who evaluate the operator’ s performance more frequently than every three years may retain the most recent certification record; otherwise, certification records must be maintained for three years.

ADDITIONAL OSHA INFORMATION

For more information, contact your local or Regional OSHA office (listed in the telephone directory under United States Government – Department of Labor – Occupational Safety and Health Administration).

OSHA also has a Home Page on the Internet. The address is: http://www.osha.gov/

More Forklift Certification and Training Information:

Promote Safety the Smart Way

With CertifyMe.net’s forklift training and certification program, you can promote safety in your workplace, certify forklift operators without sending them away for training and print certificates and operator cards on the same day. It’s quick and easy. Our forklift operator training and certification satisfies the requirements of Worker’s Comp, OSHA field inspectors and Liability Insurance.

OSHA Forklift Training and Certification

Why worry about OSHA? In the current regulatory environment, OSHA has the authority to levy a fine of $7,000 for every untrained forklift operator. In cases of willful violations, this can escalate to $70,000. In the coming year, there will be 100,000 reported forklift accidents in which 100 workers will lose their lives. Forklift training and certification by CertifyMe.net will help your company avoid an OSHA citation. Our forklift training and certification involves training, certification and documentation.

How does CertifyMe.net Work?

Your trainee operators may access our forklift training and certification program online any time of the day or night. This usually takes between 60 and 90 minutes to complete. We provide everything you need to deliver the information they need to recognize safety hazards in the workplace and to operate specialized equipment. We also provide the necessary documentation for forklift operator training and certification. OSHA training and certification regulations do not require the person who administers the on-site evaluation to have special forklift training and certification. The employer simply needs to designate a competent person who has the experience and knowledge to ascertain whether the trainee is operating the equipment correctly.

What Do We Teach?

The online forklift certification training from CertifyMe.net teaches each main type of forklift, allowing workers to receive the exact type of forklift training they need, while saving money and time by bypassing the training they don’t need.

We teach the following types of forklifts and provide certifications for each:

• Warehouse Forklifts, Classes 1, 4, 5

Electric Motor Rider Trucks, Internal Combustion Engine Trucks-Cushion Tires, Internal Combustion Engine Trucks-Pneumatic Tires

• Pallet Jacks and Order Pickers, Classes, 2, 3

Electric Motor Narrow Aisle Trucks, Electric Motor Hand or Hand/Rider Trucks

Forklift Training Video

• Rough Terrain Forklifts, Class 7

Electric and Internal Combustion Engine Tractors

Each course can be completed online, with both English and Spanish options available.

Receiving the Operator Certification

When the on-site evaluation is completed, the employer can print out a temporary certificate and operator card and have the employee sign off on both. The certificate goes into your safety file and the card is kept by the operator. CertifyMe.net will send the original certificate and operator card through the mail. What’s more, we offer free three-year forklift recertification renewals of forklift operator training and certification. CertifyMe.net is the only provider to offer this facility. We provide 24/7 support.

Learn more about us by simply calling 1-888-699-480 or get started here. Whatever your company’s OSHA forklift training requirements are, CertifyMe.net offers the expertise and comprehensive instruction to help you achieve OSHA compliance without breaking the bank. Contact CertifyMe.net today to implement your own OSHA forklift certification program.

To Learn More About Forklift Certification and Training, Read These Great Blog Posts

Do you want a new career? Learn why you should train to become a forklift operator and get started by completing your forklift training and receiving your certification. Forklifts are an essential tool used on all kinds of worksites. Employers need workers with the proper forklift training to operate these machines, and to provide their business with the most efficient, productive, and safety-oriented workplace as possible. What does this mean for you? A safer environment and higher pay with more frequent promotions!

Forklift training and certification can save lives. The most common forklift accidents occur from tip overs, workers being crushed under the lift, and workers being struck by the lift. Unfortunately, these accidents most often result in serious injuries or fatality. The good news is, many accidents can be avoided with proper forklift training, and that’s why CertifyMe.net is dedicated to helping people get appropriate OSHA compliant forklift certification.

Get a deeper look into our forklift training programs and learn more about how we can provide you with the knowledge you need to operate forklifts and the certification most desired by employers. Our forklift training is easy, convenient, and the best thing you can do to protect your safety as a forklift operator and land a great career.